[cisco-voip] MeetingPlace express VMware ESX

[Voice Noob]

Anyone else have this working?

On Tue, Sep 23, 2008 at 9:48 AM, Voice Noob <voicenoob at gmail.com> wrote:

> Anyone one else? Does anyone know if the next version of MPE will be on the
> same OS as CUCM so that it can detect VMware?
>
> On Mon, Sep 22, 2008 at 2:58 PM, Voice Noob <voicenoob at gmail.com> wrote:
>
>> Thanks but I said that I have already converted it in my original e-mail.
>> I did use the VMware tool . The problem is that the server image that is
>> shipped uses IDE drives and ESX does not support IDE. So during the
>> conversion proccess it converts it to SCSI and then when I start the vm the
>> GRUB loader does not boot the system.
>>
>> On Mon, Sep 22, 2008 at 1:27 PM, Reto Gassmann <voip at mrga.ch> wrote:
>>
>>>  Hi
>>>
>>> try to import the image with the VMWare Converter.
>>> http://www.vmware.com/products/converter/
>>> you can set source and destination and it converts the Image from
>>> VMServer to ESX.
>>>
>>>   ----- Original Message -----
>>> *From:* Voice Noob <voicenoob at gmail.com>
>>> *To:* cisco-voip at puck-nether.net
>>> *Sent:* Monday, September 22, 2008 8:18 PM
>>> *Subject:* [cisco-voip] MeetingPlace express VMware ESX
>>>
>>>
>>> Has anyone found a way to install Meetingplace 2.x in Vmware ESX? I know
>>> you can order the NFR from Cisco and they will send you a VMware image
>>> already configured. The problem is all I have at my company. ESX and not
>>> vmware server. I have tried to convert it and it will not boot.
>>>
>>> ------------------------------
>>>
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081017/91c6a99a/attachment-0001.html>