[cisco-voip] Intercluster Trunk between CCM 4 and CUCM 6

[Thorsten.Mayr at barclayscapital.com]

Non GK controlled ICT's don't register a backup trunk.
If you specify multiple "remote subscribers", you have to create them on
each of them and in the same order - mirroring on the other cluster.

http://www.cisco.com.ru/en/US/docs/voice_ip_comm/cucm/srnd/6x/trunks.htm
l#wp1044701


Cheers
T

> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net 
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of 
> Ratko Dodevski
> Sent: Tuesday, October 21, 2008 8:11 AM
> To: Ocampo, Walter
> Cc: cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] Intercluster Trunk between CCM 4 and CUCM 6
> 
> Hi
> Thanks for helping.... I kind a solve the problem. I don't 
> know why, but trunks were not created on the subscriber 
> server. I was working on the publisher, but when i check the 
> subscriber... there were no trunks... they did not 
> replicate... Now it's working, but i'm a little confused why 
> did that happened???? Also i had to make trunks from CCM 4.1 
> to the subscriber CUCM 6.
> 
> If you know something please tell me... 
> 
> Best regards
> 
> Ratko Dodevski
> Skopje, Macedonia
> 
> 
> On Mon, Oct 20, 2008 at 3:12 PM, Ocampo, Walter 
> <WOCAMPO at broward.org> wrote:
> 
> 
> 	We created an intercluster trunk without no issues:
> 
> 	Here is what  we did:
> 
> 	In call manager 6.X : Intercluster trunk no-gatekeeper 
> controlled 
> 
> 	-CSS should be the one from the phones that you want 
> the calls to be completed
> 
> 	- In the Remote Cisco Unified Communication Manager 
> Information should place the call manager from the Phones 
> that are registering.
> 
> 	-The route pattern pointing to this Trunk.
> 
> 	 
> 
> 	If this is the way that you have configured and calls 
> are not going through. 
> 
> 	Do the following:
> 
> 	Run RTMT 
> 
> 	Set the trace in Cisco Unified Serviceability to 
> detailed for the Call manager service.
> 
> 	Make the calls
> 
> 	Collect the trace file for the time you have made the call. 
> 
> 	This trace file will give you the details why the call 
> is not completing.
> 
> 	 
> 
> 	Hope this help,
> 
> 	Regards,
> 
> 	
> 	
> 
> 	 
> 
> 	 
> 
> 	Walter Ocampo
> 
> 	System Network Analyst
> 
> 	Office of Information Technology
> 
> 	540 S.E 3rd. Ave, Suite 300
> 
> 	Fort Lauderdale, FL 33301
> 
> 	(954) 357 8041 Cell (954) 632 8228
> 
> 	wocampo at broward.org
> 
> 	 
> 
> 	 
> 
> 	 
> 
> 	From: cisco-voip-bounces at puck.nether.net 
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of 
> Ratko Dodevski
> 
> 	Sent: Monday, October 20, 2008 4:46 AM
> 	To: Scott Voll
> 	
> 	Cc: cisco-voip at puck.nether.net
> 	Subject: Re: [cisco-voip] Intercluster Trunk between 
> CCM 4 and CUCM 6
> 
> 	 
> 
> 	Hi
> 	Sorry for my late response but i was pretty busy.... 
> I'm almost sure that it is not a CSS issue, because the same 
> CSS works just fine for internal calls and calls through 
> voice gateway ... Is there some known issue for intercluster 
> trunk between CUCM 6.1.2.1000-13 and CCM 4.1.(3)sr3a?????? 
> I've tried trunking (intercluster without gatekeeper) with 
> other CCM 4.1.(3)sr3a and it was the same. I can make calls 
> from phones registered in CCM 4.1.(3)sr3a to CUCM 
> 6.1.2.1000-13 and not the other way.  I've 3 more days to 
> solve the problem, so please if someone have any idea.... 
> HELP!!!!!!!!!!!
> 	
> 	Ratko Dodevski
> 	Skopje, Macedonia
> 
> 	On Sat, Oct 18, 2008 at 1:06 AM, Scott Voll 
> <svoll.voip at gmail.com> wrote:
> 
> 	Then I would say it's a CSS issue.
> 
> 	 
> 
> 	Scott
> 
> 	On Fri, Oct 17, 2008 at 1:47 PM, Ratko Dodevski 
> <rade239 at gmail.com> wrote:
> 
> 		Hi.... i need some help.... a configured new 
> CUCM 6 instead of my old CCM 4... everything is just fine. 
> But there is a little problem. I have another CCM 4 on a 
> different location and it appears that the trunk between CCM 
> 4 and CUCM 6 does not work. I can make calls from phones on 
> CCM 4 to Phones registerd on CUCM 6, but not the other way. 
> All the trunk settings are same as they were before. Is there 
> something i should know about trunking CCM 4 and CUCM 6????? 
> (I don't have gatekeeper)
> 		
> 		Thanks
> 		
> 		Ratko Dodevski
> 
> 		 
> 
> 		_______________________________________________
> 		cisco-voip mailing list
> 		cisco-voip at puck.nether.net
> 		https://puck.nether.net/mailman/listinfo/cisco-voip
> 
> 	 
> 
> 	 
> 
> 
> 
_______________________________________________

This e-mail may contain information that is confidential, privileged or otherwise protected from disclosure. If you are not an intended recipient of this e-mail, do not duplicate or redistribute it by any means. Please delete it and any attachments and notify the sender that you have received it in error. Unless specifically indicated, this e-mail is not an offer to buy or sell or a solicitation to buy or sell any securities, investment products or other financial product or service, an official confirmation of any transaction, or an official statement of Barclays. Any views or opinions presented are solely those of the author and do not necessarily represent those of Barclays. This e-mail is subject to terms available at the following link: www.barcap.com/emaildisclaimer. By messaging with Barclays you consent to the foregoing.  Barclays Capital is the investment banking division of Barclays Bank PLC, a company registered in England (number 1026167) with its registered office at 1 Churchill Place, London, E14 5HP.  This email may relate to or be sent from other members of the Barclays Group.
_______________________________________________