[cisco-voip] Intergrating CUCM 6.1 to Nortel Call Pilot via QSIG

[Joe Albertini]

Just in case you're curious.  Configuring Cisco IP phones to use Nortel's CallPilot voice mail system is easier than setting up the reverse.  No need to manipulate the ADPU for MWI.  Simply configure a QSIG PRI with the correct RCAPs and viola, it works.

Regards,
Joe

-------------- Original message -------------- 
From: tyrolian at comcast.net 

Hi,
 
A few years back on CCM 4.1.3, I implemented Unity voice mail with Nortel Meridian phones via QSIG.  Now I am trying to implement the reverse.  That is, Cisco IP phones (CUCM 6.1) using Nortel's Call Pilot voice mail via QSIG.  Does anyone have experience with this configuration?
 
Thanks,
Joe 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081021/86cf7ecb/attachment.html>
-------------- next part --------------
An embedded message was scrubbed...
From: tyrolian at comcast.net
Subject: Re: [cisco-voip] Intergrating CUCM 6.1 to Nortel Call Pilot via QSIG
Date: Mon, 20 Oct 2008 20:04:53 +0000
Size: 1483
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081021/86cf7ecb/attachment.mht>