[cisco-voip] Wireshark - OT

[Sean Walberg]

Sure, if Wireshark sees the packet as RTP packets it'll display that in the
info column, or in the packet details.  For example:

Payload type: ITU-T G.711 PCMU (0)

If Wireshark is not seeing the packets as RTP, go to Edit->Preferences,
Protocols->RTP, and make sure "Try to decode RTP outside of conversations"
is checked.

Sean


On Wed, Oct 22, 2008 at 4:21 AM, Lemon <lemon at lemon.za.net> wrote:

> i know it is a bit off topic but is there a way to use wireshark to
> tell if the voip call is G711 ulaw or alaw?
>


-- 
Sean Walberg <sean at ertw.com>    http://ertw.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081022/f2b880a5/attachment.html>