[cisco-voip] CUOM/CUSM (Unified Operations Manger 2.0.1) and SSM (Service Statistics Monitor 1.0)

[Jason Aarons (US)]

I'm looking to swap some deep CUOM knowledge, please reply offline if
you have a large production installation.  I've done a couple installs
but still think of myself as a noob.

 

In short in Service Statistics Monitor 1.0 I get "no data available"
suspect my data discovery could take hours, also had some generic
questions.

 

Jason Aarons

Consultant

  

Dimension Data

E-mail ::jason.aarons at us.didata.com

Mobile :: +1-904-338-3245 e-fax :: +1-904-339-9696

                      

 




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081023/fd86daef/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 4171 bytes
Desc: image001.gif
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081023/fd86daef/attachment-0001.gif>