[cisco-voip] h.323 trunk between UCM 6.1.2 and CM3 s8700

[Friedland, Jarrod]

Hi All

I wonder if anyone can shed any light on the following for me. We have in our poc a Callmananger connecting to our dev s8700 via h.323. Voice avaya to CCM no issues, works time and time again. However CCM to Avaya first couple of calls work and then nothing - Cisco TAC came back to my engineers with (Avaya sending a tcp-reset to the Callmanager.

Has anyone come across this issue running a h323 trunk between callmanager and s8700.

Any assistance or direction would be greatly appreciated.

Thanks




--
Jarrod

========================================================================

Please consider the environment before printing out this email

Please Note:

This communication has been sent on behalf of The Royal Automobile Club of
Queensland Limited (RACQ).  The information contained in this communication
may be privileged and confidential.  If you are not the intended recipient,
any use, disclosure or copying of this communication is expressly
prohibited.  If you have received this communication in error, please delete
it immediately.  RACQ and its associated entities do not warrant or
represent that this communication (including any enclosed files) is free
from electronic viruses, faults or defects.

If this is a commercial electronic message within the meaning of the Spam 
Act(2003), you may indicate that you do not wish to receive any further 
commercial electronic messages from RACQ by sending an e-mail to 
unsubscribe at racq.com.au with your details or by contacting RACQ on 131905
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081024/0df57066/attachment.html>