[cisco-voip] Finding switchports for a list of phones

[Dave Wolgast]

Thanks for your suggestions...just found out that we have a copy of
CiscoWorks LMS running that will generate a switchport map that I'll
export to Excel and vlookup against my list of MACs.

>From there, we can cut/paste configs for each stack...maybe even have
Excel generate the line of config.

Thanks again.

On 10/24/08, Dave Wolgast <dwolgas1 at rochester.rr.com> wrote:
> We are in the process of upgrading from CUCM 4.1(3) to 6.1(2), and while we
> are doing that, we are also splitting our single cluster into two to
> segregate traffic for our contact center per recommendation of Cisco and our
> UCCE implementation partner (also moving from ICM 6.0 - 7.2 and IPQM 3.5(4)
> - IP-IVR 5.0).
>
> Unfortunately, our contact center and non-contact center users are mixed
> among our closet access switches (16 closets).
>
> We have a list of  300-400 MAC addresses of contact center phones (those
> registered with the ICM JTAPI user), and need to search each closet stack to
> correlate those MACs with their associated switchport so we can change the
> VLANs for those ports to point to our new cluster.
>
> Can anyone suggest any slick ways of getting this done?  Anyone have any
> scripting they would be willing to share?
>
> Thanks very much & have a great weekend!
>
> --
> Dave Wolgast
>


-- 
Dave Wolgast
Livonia, NY