[cisco-voip] Config for P2P Router for QOS

[Ryan West]

Matthew,

Look up LLQ and use an example config for that.  You shouldn't have to mess with the markings if it's coming from Cisco call processors, should be 26 for signaling and 46 for voice.  What codec will you be using between sites?

-ryan

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Matthew Loraditch
Sent: Monday, October 27, 2008 9:50 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Config for P2P Router for QOS

Does anyone have an example config for setting up QoS on point to point routers. We just got some new 1841s and an additional T-1 (from 1.5 to 3.0Mbps) to support a limited amount of Cisco phones (10) at a remote site. I have some older configs I can look at but wanted to see if there is any new better way to do this
Thanks in advance!




Matthew Loraditch
10944 Beaver Dam Road, Suite A
Hunt Valley, Maryland  21030
support at heliontechnologies.com<mailto:support at heliontechnologies.com>
(p) (410) 252-8830
(F) (443) 541-1593

Visit us at www.heliontechnologies.com<http://www.heliontechnologies.com>
Support Issue? Email support at heliontechnologies.com<mailto:support at heliontechnologies.com> for fast assistance!

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081027/49e88420/attachment-0001.html>