[cisco-voip] CME Forward calls to Voice Gateway with FXO

[Ryan Ratliff]

dial-peer voice 1 voip
 destination-pattern T
 session-target ipv4:ip.addr.of.fxo.router
 codec g711u
 no vad
 dtmf-relay... 
 
You'll need a pots dial-peer and an inbound voip dial-peer on the fxo router
but just send it as you would any other h.323 call.

-Ryan 

 

  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jeff Cartier
Sent: Tuesday, October 28, 2008 1:55 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] CME Forward calls to Voice Gateway with FXO



Greetings,

 

I'm having some issues with the following scenario:

 

I have several phones running correctly on a CME.and I require that their
outbound calls be forwarded to a directly connected router equipped with an
FXO card, connected to the PSTN.  

 

Could anyone provide me with some direction as to what I would need,
configuration wise, to have all outbound PSTN calls forwarded from my CME to
my voice-gateway with the FXO interface?

 

Thanks!

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081028/4bd7efd5/attachment.html>