[cisco-voip] CUCM 6 Upgrade Questions

[STEVEN CASPER]

Hi Chris,
 
Thanks for the feedback ....in both cases below it looks like you are loading 6.1.2su1 on the in-active partition  which is running 6.1.1. That can be worked around on Cluster 1 but not Cluster 2.
 
Steve


>> Chris Ward <chrward at cisco.com> 10/29/2008 1:19 PM >>>
Hi Steve,

I read through the readme to su1 and it does look like you will have to go to 6.1.2.1000-13 first. Here is the procedures:

Cluster 1 (6.1.1b):

Upgrade Pub to 6.1.2.1000-13 (installs to inactive)
Upgrade Subs to 6.1.2.1000-13 (installs to inactive)
Perform Switch Versions on Pub first then subs (This makes the 6.1.2.1000-13 partition active)
Upgrade Pub to 6.1.2su1
Upgrade Sub to 6.1.2su1
Perform Switch Versions on Pub first then subs (This makes the 6.1.2su1 partition active)

Cluster 2 (6.1.2.1000-13):

Since this cluster is already at 6.1.2.1000-13, you only need to perform the later steps.
Upgrade Pub to 6.1.2su1
Upgrade Sub to 6.1.2su1
Perform Switch Versions on Pub first then subs (This makes the 6.1.2su1 partition active)

HTH

Chris Ward 

From: STEVEN CASPER <SCASPER at mtb.com>
Date: Wed, 29 Oct 2008 11:53:40 -0400
To: <cisco-voip at puck.nether.net>
Subject: [cisco-voip]  CUCM 6 Upgrade Questions

Got a couple of upgrade scenarios I would like to run by the group. Based on some recent PSIRTs I am looking to upgrade to CUCM 6.1(2)su1 (6.1.2.1001-4)
 
Cluster 1
 
6.1.1b (6.1.1.3000.2) Active
nothing on the inactive partition.
 
Reading the release notes for 6.1(2)su1  it appears I would have to load 6.1.2 (6.1.2.1000-13) and then load 6.1(2)su1 (6.1.2.1001-4) on the inactive partition. This seems easy enough if true then:
 
Cluster 2 
 
 6.1.2 (6.1.2.1000-13) Active partition
 6.1.1b (6.1.1.3000.2) Inactive partition
 
Reading the release notes it appears I would have to load 6.1.2 (6.1.2.1000-13) and then load 6.1(2)su1 (6.1.2.1001-4) on the inactive partition. But when I try to do this the system does not recognize 6.1.2 (6.1.2.1000-13) as a valid upgrade file.  I know my SFTP is working because I can see various other files available to load but it ignores the presence of the 6.1.2 (6.1.2.1000-13) file. I wonder if this is because it is already running on the active partition?
 
Thanks!
Steve
 
 
 
 
 
 
 
 
************************************
This email may contain privileged and/or confidential information that is intended solely for the use of the addressee.  If you are not the intended recipient or entity, you are strictly prohibited from disclosing, copying, distributing or using any of the information contained in the transmission.  If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy.  This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act and the Sarbanes-Oxley Act.  You may not directly or indirectly reuse or disclose such information for any purpose other than to provide the services for which you are receiving the information.
There are risks associated with the use of electronic transmission.  The sender of this information does not control the method of transmittal or service providers and assumes no duty or obligation for the security, receipt, or third party interception of this transmission.
************************************

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 
************************************
This email may contain privileged and/or confidential information that is intended solely for the use of the addressee.  If you are not the intended recipient or entity, you are strictly prohibited from disclosing, copying, distributing or using any of the information contained in the transmission.  If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy.  This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act and the Sarbanes-Oxley Act.  You may not directly or indirectly reuse or disclose such information for any purpose other than to provide the services for which you are receiving the information.
There are risks associated with the use of electronic transmission.  The sender of this information does not control the method of transmittal or service providers and assumes no duty or obligation for the security, receipt, or third party interception of this transmission.
************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081029/341b0a2b/attachment.html>
-------------- next part --------------
************************************
This email may contain privileged and/or confidential information that is intended solely for the use of the addressee.  If you are not the intended recipient or entity, you are strictly prohibited from disclosing, copying, distributing or using any of the information contained in the transmission.  If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy.  This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act and the Sarbanes-Oxley Act.  You may not directly or indirectly reuse or disclose such information for any purpose other than to provide the services for which you are receiving the information.
There are risks associated with the use of electronic transmission.  The sender of this information does not control the method of transmittal or service providers and assumes no duty or obligation for the security, receipt, or third party interception of this transmission.
************************************