[cisco-voip] CUCM 6 Upgrade Questions

Wed Oct 29 15:10:57 EDT 2008

Chris,

Yes, thank you for the clarification!

Steve

>>> Chris Ward <chrward at cisco.com> 10/29/2008 3:03 PM >>>
Steve,

I think I see your confusion now. 6.1.2.1000-13 needs to be the active
version (on active partition) to apply 6.1.2su1. The version on inactive
partition is unimportant during an upgrade only the active partition is
examined for upgrade compatibility.

The reason cluster 2 couldn’t find a valid upgrade is that you can only
upgrade to a newer version that what is on your active partition. So in
Cluster 2’s case, since 6.1.2.1000-13 is already on the active
partition, you wouldn’t be able to attempt an upgrade to 6.1.2.1000-13.

Does that help?

Chris Ward 
Cisco Systems Inc. 
Customer Support Engineer
Unified Communication Infrastructure
Boxborough, MA 
9:00am - 6:00pm Eastern 
978-936-0217
chrward at cisco.com 

From: STEVEN CASPER <SCASPER at mtb.com>
Date: Wed, 29 Oct 2008 13:47:14 -0400
To: Chris Ward <chrward at cisco.com>, <cisco-voip at puck.nether.net>
Subject: Re: [cisco-voip]  CUCM 6 Upgrade Questions

Hi Chris,

Thanks for the feedback ....in both cases below it looks like you are
loading 6.1.2su1 on the in-active partition  which is running 6.1.1.
That can be worked around on Cluster 1 but not Cluster 2.

Steve

>> Chris Ward <chrward at cisco.com> 10/29/2008 1:19 PM >>>
Hi Steve,

I read through the readme to su1 and it does look like you will have to
go to 6.1.2.1000-13 first. Here is the procedures:

Cluster 1 (6.1.1b):

Upgrade Pub to 6.1.2.1000-13 (installs to inactive)
Upgrade Subs to 6.1.2.1000-13 (installs to inactive)
Perform Switch Versions on Pub first then subs (This makes the
6.1.2.1000-13 partition active)
Upgrade Pub to 6.1.2su1
Upgrade Sub to 6.1.2su1
Perform Switch Versions on Pub first then subs (This makes the 6.1.2su1
partition active)

Cluster 2 (6.1.2.1000-13):

Since this cluster is already at 6.1.2.1000-13, you only need to
perform the later steps.
Upgrade Pub to 6.1.2su1
Upgrade Sub to 6.1.2su1
Perform Switch Versions on Pub first then subs (This makes the 6.1.2su1
partition active)

HTH

Chris Ward 

From: STEVEN CASPER <SCASPER at mtb.com<SCASPER at mtb.com> >
Date: Wed, 29 Oct 2008 11:53:40 -0400
To: <cisco-voip at puck.nether.net<cisco-voip at puck.nether.net> >
Subject: [cisco-voip]  CUCM 6 Upgrade Questions

Got a couple of upgrade scenarios I would like to run by the group.
Based on some recent PSIRTs I am looking to upgrade to CUCM 6.1(2)su1
(6.1.2.1001-4)

Cluster 1

6.1.1b (6.1.1.3000.2) Active
nothing on the inactive partition.

Reading the release notes for 6.1(2)su1  it appears I would have to
load 6.1.2 (6.1.2.1000-13) and then load 6.1(2)su1 (6.1.2.1001-4) on the
inactive partition. This seems easy enough if true then:

Cluster 2 

 6.1.2 (6.1.2.1000-13) Active partition
 6.1.1b (6.1.1.3000.2) Inactive partition

Reading the release notes it appears I would have to load 6.1.2
(6.1.2.1000-13) and then load 6.1(2)su1 (6.1.2.1001-4) on the inactive
partition. But when I try to do this the system does not recognize 6.1.2
(6.1.2.1000-13) as a valid upgrade file.  I know my SFTP is working
because I can see various other files available to load but it ignores
the presence of the 6.1.2 (6.1.2.1000-13) file. I wonder if this is
because it is already running on the active partition?

Thanks!
Steve

************************************
This email may contain privileged and/or confidential information that
is intended solely for the use of the addressee.  If you are not the
intended recipient or entity, you are strictly prohibited from
disclosing, copying, distributing or using any of the information
contained in the transmission.  If you received this communication in
error, please contact the sender immediately and destroy the material in
its entirety, whether electronic or hard copy.  This communication may
contain nonpublic personal information about consumers subject to the
restrictions of the Gramm-Leach-Bliley Act and the Sarbanes-Oxley Act. 
You may not directly or indirectly reuse or disclose such information
for any purpose other than to provide the services for which you are
receiving the information.
There are risks associated with the use of electronic transmission. 
The sender of this information does not control the method of
transmittal or service providers and assumes no duty or obligation for
the security, receipt, or third party interception of this
transmission.
************************************

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 

************************************
This email may contain privileged and/or confidential information that
is intended solely for the use of the addressee.  If you are not the
intended recipient or entity, you are strictly prohibited from
disclosing, copying, distributing or using any of the information
contained in the transmission.  If you received this communication in
error, please contact the sender immediately and destroy the material in
its entirety, whether electronic or hard copy.  This communication may
contain nonpublic personal information about consumers subject to the
restrictions of the Gramm-Leach-Bliley Act and the Sarbanes-Oxley Act. 
You may not directly or indirectly reuse or disclose such information
for any purpose other than to provide the services for which you are
receiving the information.
There are risks associated with the use of electronic transmission. 
The sender of this information does not control the method of
transmittal or service providers and assumes no duty or obligation for
the security, receipt, or third party interception of this
transmission.
************************************
************************************
This email may contain privileged and/or confidential information that is intended solely for the use of the addressee.  If you are not the intended recipient or entity, you are strictly prohibited from disclosing, copying, distributing or using any of the information contained in the transmission.  If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy.  This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act and the Sarbanes-Oxley Act.  You may not directly or indirectly reuse or disclose such information for any purpose other than to provide the services for which you are receiving the information.
There are risks associated with the use of electronic transmission.  The sender of this information does not control the method of transmittal or service providers and assumes no duty or obligation for the security, receipt, or third party interception of this transmission.
************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081029/bbcc5405/attachment-0001.html>