[cisco-voip] Transcoding?

[Scott Voll]

Just to come full loop. I had hard set the codec on a couple dial-peers to
g711.  All the other ones had a voice class of "711" which correlates to
711, 729.  I just missed it in the dial-peer config

codec 711 vs
voice class 711

Anyway. thanks for all the help.

Scott
On Wed, Oct 29, 2008 at 7:08 AM, Tim Smith <smithsonianwa at gmail.com> wrote:

> Hey Scott,
>
> Curious, did you get this sorted?
>
> Cheers,
>
> Tim
>
> Sent from my iPhone
>
>
> On 27 Oct 2008, at 21:51, "Scott Voll" <svoll.voip at gmail.com> wrote:
>
>   I have setup transcoding at the main site for applications like UCCx
>> that only support G711 for my WAN phones that are setup for g729.  I'm
>> running CM 6.1 now and I'm having issues with the transcoding resources
>> unregistering.(kind of a side note).
>>
>> But one of my remote sites use the Main sites VGW for out bound dialing.
>>  But I'm finding that the remote site is using xcoding for ALL out bound
>> dialing.  I do have some voice class codecs set to g711u and g729r applied
>> to the Dial-peers.  I've tried g729br also and still it uses the xcoding.
>>  Why?  should the phone / VGW negoiated this rather then the xcoding
>> resource being used?  Am I out to lunch with my understanding?
>>
>> Thanks
>>
>> Scott
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081029/5032b767/attachment.html>