[cisco-voip] Analog modem and faxes?

[Scott Voll]

We have been just using ATA's  So long as the faxes are set to No ECM and
Super G3 is turned off and all The VGW's have everything set to passthrough
things have worked pretty well.  I also pushed modems through  but it's been
at least a couple years since we took the last modems out.

as for centralized Faxing........ Good Luck.  We got an IP Fax server and it
works great exept for the signitures and hand written stuff which then you
would have to scan then fax.  The question is do you support scanners or
Faxes.  I've found faxes to be easier to support. :-)

Scott

On Fri, Oct 31, 2008 at 10:35 AM, Ed Leatherman <ealeatherman at gmail.com>wrote:

> We've had pretty good luck with the ATA's and VG224's with faxes and credit
> card terminals. I've only run into a couple instances where people had an
> actual data modem, I've left them on telco lines.
>
> There was an initiative in the past to have a centralized fax solution but
> it never got any traction here. People still want a physical device they can
> walk up to and put a piece of paper in.. I don't think that will change here
> for awhile unless it comes down as an executive level decision.
>
>
>>
>> Modems are still a little fuzzy for me, not sure how best to get rid of
>> those, as for faxing, I'd like to get off of the analog fax machines all
>> together, but not sure how to do that yet either…what are you guys using?
>>
>
>
>
> --
> Ed Leatherman
> Assistant Director, Voice Services
> West Virginia University
> Telecommunications and Network Operations
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081031/89a083d5/attachment.html>