[cisco-voip] Configure CCM 4.1 and Teles iGATE

[Jason Aarons (US)]

The other GSM gateway I have used (Multitech CallFinder) connected to my
FXO ports..

 

You might need a sniffer (Wireshark, Ethereal) to capture the H323
conversation and smart decode what's happening.

 

Other option would be to look at ccm trace files.  

 

This likely is not a easy problem -jason

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of David Lima
Sent: Monday, September 01, 2008 4:21 PM
To: Jonathan Charles
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Configure CCM 4.1 and Teles iGATE

 

Hi Jhon, thanks for the advice. My GSM gateway - Teles iGATE to saving
costs is new and I need to integrate with my CCM, but I'm missing
something in the configuration. Do you have a similar solution?

Thanks again

David

 

________________________________

De: Jonathan Charles [mailto:jonvoip at gmail.com] 
Enviado el: Lunes, 01 de Septiembre de 2008 04:10 p.m.
Para: David Lima
CC: cisco-voip at puck.nether.net
Asunto: Re: [cisco-voip] Configure CCM 4.1 and Teles iGATE

 

Well, more interested in whether that H.323 gateway supports H.323
version 2...

If it doesn't... then you will need a GK to talk to it... in fact, you
may need a GK to talk to it anyway...


Jonathan

On Mon, Sep 1, 2008 at 3:00 PM, David Lima <David.Lima at alphasys.com.bo>
wrote:

Hi Jonathan, nice to write to you again, I have a CCM 4.1(3)sr7, I
suppose that the version is H323v2.

Sorry, How can I check that?

Thanks 

David

 

________________________________

De: Jonathan Charles [mailto:jonvoip at gmail.com] 
Enviado el: Lunes, 01 de Septiembre de 2008 03:57 p.m.
Para: David Lima
CC: cisco-voip at puck.nether.net
Asunto: Re: [cisco-voip] Configure CCM 4.1 and Teles iGATE

 

What version of H.323 is it running? 

On Mon, Sep 1, 2008 at 2:53 PM, David Lima <David.Lima at alphasys.com.bo>
wrote:

Hi all, i have a CCM 4.1(3)sr7 and  a gateway GSM (Teles iGATE). I add
this gateway as an h323 GW in the CCM administration page and belongs to
the local device pool, I have configured HW (2801) and SW (CCM)
resources. But I cannot establish a cell-phone call, it rings two times
and then is dropped. What I need to verify.

Thanks friends

David


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

 

 




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080901/4bd5adea/attachment.html>