[cisco-voip] T1-CAS E&M and Callerid

[Kris Seraphine]

If I remember correctly, E&M-FGD will only provide incoming calls.
You need to split your circuit into two ds0-groups.  Configure one as
E&M-FGD and the other as FGD-EANA for outbound calls.

You lose quite a bit of busy hour capacity with your circuit this way
but this is how I've had to do it in the past.

On Tue, Sep 2, 2008 at 1:05 PM, Carter, Bill <bcarter at sentinel.com> wrote:
> Need clarification. Customer has T1 CAS E&M wink circuit.
>
>
>
> How to I enable inbound Caller-ID?  FGD?
>
>
>
>
>
> If I configure a DS0-group with:
>
> ds0-group 1 timeslots 1-24 type e&m-fgd
>
>
>
> Will inbound and outbound calling still be permitted on the T1?
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>



-- 
kris seraphine