[cisco-voip] 12.4(20)T and VG224 DC Voltage for hotel phones

[Mike Lydick]

Should activate up to 90v. What I have found is that the phone has to be
ordered to use FSK. This option typically cost more. This update does not
help with the neon VMWI option. Also there is a bug in earlier 12.4 releases
that prevents VMWI from working. Fixed after 12.4(17.09)T.
CSCSK58140

On Wed, Sep 3, 2008 at 10:08 AM, Jason Aarons (US) <
jason.aarons at us.didata.com> wrote:

>  No more FSK only support.  Does this mean hotel phones that have MWI
> light needing 90-volts light will work?  I take it as no, but what 3rdparty phone make/model can take advantage of this? Trying to understand this
> better.
>
>
>
>
> http://www.cisco.com/en/US/docs/ios/voice/fxs/configuration/guide/fxsdcvmwi.html
>
>
>
> ------------------------------
>
> * Disclaimer: This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the designated
> addressee(s) named above only. If you are not the intended addressee, you
> are hereby notified that you have received this communication in error and
> that any use or reproduction of this email or its contents is strictly
> prohibited and may be unlawful. If you have received this communication in
> error, please notify us immediately by replying to this message and deleting
> it from your computer. Thank you. *
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>


-- 
Best Regards,

Mike Lydick
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080903/1f2f41b2/attachment.html>