[cisco-voip] Speech Connect transfer to CUCM6

[Patrick Aland]

The correct format is sip:%D at x.x.x.x HOWEVER you have to make sure
that have that in both the transfer format fields on the dialing page
(both internal and external). I had the same issue until I realized
that even though I don't want to use external transfers i still have
to specify a format

On Thu, Sep 4, 2008 at 6:47 AM, Gary Roberton <gary.ciscomail at gmail.com> wrote:
> I am implementing a CUCM6 solution using Unity 5 and Speech Connect.  When
> calling Speech Connect, the recipients are identified but transfers fail
> which is due to the dialling rules not being correct on the Speec Connect
> server.  However when I try to use the string - sip:%D at 1.2.3.4 replacing
> 1.2.3.4 with the IP address of the CUCM6 publisher, I get an error that the
> address is in the incorrect format and it should be 01.23.45.67.  Does
> anyone know the correct format for speech connect to transfer calls to CUCM.
>
> Thanks
>
> Gary
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>



-- 
--Patrick