[cisco-voip] Where is ring back generated?

[Philip Walenta]

Ringback is generally the responsibility of the "far-end" terminating
device.

So in your scenario below the Tandberg gateway should be generating ringback
to the PSTN based caller. 

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Robert Kulagowski
Sent: Monday, September 08, 2008 12:45 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Where is ring back generated?

As part of my continuing effort to mess around with stuff, I've got a
Tandberg 3241 PRI gateway terminating PRIs from MaBell.  It has a H.323
connection to a 2851.  Inbound callers don't hear ringback, but there is an
audio path once the called person goes off-hook.

Can someone who's deeper into H.323 let me know where the ringback is
supposed to be coming from?  Should the Codian generate ringback
immediately, or is it waiting for a H.323 message from the Cisco, or is this
just in the "too hard to do" category?


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip