[cisco-voip] BARS 4.0(11)

[Wes Sisk]

a bit of insight:
BARS on CM contacts the BARS client/stub/target running on CRS.  The 
client on CRS should generate logs providing some insight.  Those logs 
may provide insight on the reason for failure.  CSCef13462 is notorious 
for this.  Does that workaround make any difference for you?

Given the sudden start these may be relevant:
CSCsb02046 - BARS may not work when servers are members of a windows domain
CSCsh40943 - bars fails to backup when target location too large

Snippets from the CRS BARS log (or lack thereof) would provide more insight.

/Wes

David Iverson wrote:
> My BARS quit backing up the remote server successfully and TAC can't 
> find anything wrong. Solution: uninstall and upgrade to the latest 
> version.
>  
> What happens during the normal process is that BARS is running on CCM 
> and can back up that server with no problem. When it goes to backup 
> CRS, it just sits there and churns until I kill the process. I have 
> removed and readded the server IP/authentication and it validates. I 
> even rebooted CRS cleanly. I have been told by 2nd level that the 
> barbicomm.dll file checked out clean. Has anyone else run into this? I 
> hate the reinstall/reboot approach to solving what looks like a simple 
> problem with an overlooked solution.
>  
> Regards,
> David
> ------------------------------------------------------------------------
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080909/860edf6f/attachment.html>