[cisco-voip] howto: automatically backup cme config

[Ryan West]

Not to highjack your post here, but has anyone figured out a way to auto backup the CUE config?

-ryan

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Joe Cisco
Sent: Tuesday, September 09, 2008 4:05 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] howto: automatically backup cme config

I assume a large percentage of you may have already known this, but I
hadn't seen it and thought i'd post it. This a cheap/easy way to
automatically back up a CME (or any IOS device for that matter) if you
have an available FTP server. I think they started supporting this
somewhere in the 12.3 range of code.

! *** the following config will automatically back up the config
! *** of the device to the folder of the ftp server listed in the
! *** PATH statement every 10080 minutes (7 days). It will
! *** also copy the config every time a "write mem" or "copy
! *** run start" is issued.
!
!
! *** set ftp server username
ip ftp username admin
! *** set ftp server password
ip ftp password ftp-server-password-goes-here
!
!
!
archive
 path ftp://10.0.0.10/ucme-configs/router-hostname-here
 log config
 write-memory
 time-period 10080
!
!

Later,

Joe C.
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip