[cisco-voip] dial-peer related question

[William Roy]

Are both isdn e1 interfaces up and working correctly?

________________________________
From: cisco-voip-bounces at puck.nether.net [cisco-voip-bounces at puck.nether.net] On Behalf Of Tseveendorj Ochirlantuu [tseveendorj at gmail.com]
Sent: Wednesday, 10 September 2008 2:38 PM
To: cisco-voip at puck.nether.net
Cc: cisco-nsp at puck.nether.net
Subject: [cisco-voip] dial-peer related question

Hi guys

I have 5350 gateway and gateway connected to internet via gigenthernet, connected to ISDN by 2 E1 ports via PRI.

Dial peer looks like this :

dial-peer voice 4002 voip
  voice-class codec 1
 session target ipv4:61.250.94.66<http://61.250.94.66>
 incoming called-number 0301T
 dtmf-relay rtp-nte h245-signal h245-alphanumeric
 fax-relay ecm disable
 fax rate 9600
 fax protocol t38 ls-redundancy 2 hs-redundancy 2 fallback none
!
dial-peer voice 4003 pots
 destination-pattern 0301T
 progress_ind alert enable 8
 direct-inward-dial
 port 2/0:D
!
dial-peer voice 4006 pots
 destination-pattern 0301T
 progress_ind alert enable 8
 direct-inward-dial
 port 2/3:D
!

The call coming from dial-peer 4002 and outgoing to 4003, 4006.

30 calls came from 4002 to 4003 and 4006 it can handle when 31th call came it couldn't.
I think 2E1 card can handle 60 calls. but it didn't.  I think problem in configuration.

How to solve it?

Thanks for any help

Sincerely,
Tseveen.



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080910/04df8305/attachment.html>