[cisco-voip] CCM4 going to 6

[Scott Voll]

you will need to look at the hardware metric for your hardware.

IPCCx requires a minimum of a 78x5 h1 or equal.

CM can use a 78x5 3.0 but you need ram and drives (72gig)

I
http://www.cisco.com/en/US/products/hw/voiceapp/ps378/prod_brochure_list.html

With all that said, I just completed the upgrade from 4.1.3 to 6.1.2 and
UCCx 4.0.1 to 5.0.2 and I would if at all possible go to new hardware so you
can do it in parallel!  It will save you lots of time, energy, and
headaches.

Scott
On Wed, Sep 10, 2008 at 5:54 AM, John Botha - I.T <JohnB at jhb.mustek.co.za>wrote:

>  Hi All
>
>
> I have a call manager ver.. 4 with  two hp\Cisco mcs7800 servers in a
> cluster environment and one ipcc call center server
> I have the option to upgrade upgrade to version 6 but I am not sure if  the
> hardware will be able to support the new software
> Does any one know if I must change the hardware or can I use the same
> hardware for the upgrade
>
> And if there is any know issues with the upgrade because I have four remote
> sites that also will be affected by this
>
>
> Regards,
> John
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080910/ba42c1f3/attachment.html>