[cisco-voip] Caller ID. Configuration Problem

[Robert Kulagowski]

> i have call manger 6  and configure H323 gateway with  E1 PRI .
> My problem that when a call come from PRI to internal  IP Phone , i 
> can't see the caller ID. on the IP phone.
> please tell me what i configure  on the Gateway  to  show  the Caller  
> ID for any call come from the PRI  Interface.

Wait, are we talking about caller name, or caller number?  I'm assuming 
that you're getting the inbound caller number so that you know where to 
send the call.

debug isdn q931 will tell you if the telco is sending anything.
You may need isdn supp-service name calling on the interface serial 
0/0/0:23