[cisco-voip] Caller ID from FXO interface?

[Nick Griffin]

And correct me if I am wrong, but I don't believe this made the cut in 7.0
either!! Insane!!!

On Wed, Sep 17, 2008 at 4:41 PM, Countryman, Edward <
Edward.Countryman at provena.org> wrote:

>  Hello all and thank you.
>
>
>
> Just to close out this track; here is the official response I received from
> TAC on this:
>
>
>
> I looked for bug CSCea49474 in our internal engineering aliases
>
> and found that, in order to support caller ID on MGCP controlled
>
> FXO ports, you need IOS 12.4(20)T AND callmanager 7.0.
>
>
>
> If you do not have callmanager 7.0, you will not have caller ID
>
> even though the IOS version is at the correct version.
>
>
>
>
>
> *From:* Matt Slaga (US) [mailto:Matt.Slaga at us.didata.com]
> *Sent:* Monday, September 15, 2008 6:44 PM
> *To:* Wes Sisk; moataz_mmdh at yahoo.com
> *Cc:* Cisco Voyp List; Countryman, Edward
> *Subject:* RE: [cisco-voip] Caller ID from FXO interface?
>
>
>
> Also make sure you are not using an older VIC-2FXO, make sure it is at
> least a VIC-2FXO-M1.  The old modules did not support caller ID.
>
>
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Wes Sisk
> *Sent:* Monday, September 15, 2008 5:46 PM
> *To:* moataz_mmdh at yahoo.com
> *Cc:* Cisco Voyp List; Countryman, Edward
> *Subject:* Re: [cisco-voip] Caller ID from FXO interface?
>
>
>
> You can follow the defect CSCdu45646 in Cisco Bug Toolkit to monitor for
> updates.
>
> Regards,
> Wes
>
> On 9/15/2008 5:30 PM, Moataz Mamdouh wrote:
>
> MGCP doesn't support called ID , use h.323
>
> --- On *Mon, 9/15/08, Countryman, Edward <Edward.Countryman at provena.org><Edward.Countryman at provena.org>
> * wrote:
>
> From: Countryman, Edward <Edward.Countryman at provena.org><Edward.Countryman at provena.org>
> Subject: [cisco-voip] Caller ID from FXO interface?
> To: "Cisco Voyp List" <cisco-voip at puck.nether.net><cisco-voip at puck.nether.net>
> Date: Monday, September 15, 2008, 4:40 PM
>
> Does anyone know if I should expect caller ID to work for an MGCP
> controlled FXO port?
>
> Telco is sending and I can see it detected in the trace but wont display on
> the phone.  (CCM 4.1.3)
>
> _______________________________________________
>
> cisco-voip mailing list
>
> cisco-voip at puck.nether.net
>
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
>
>
>
>
>
>
>
>
> ------------------------------
>
>
>
>
>
>
>
> _______________________________________________
>
> cisco-voip mailing list
>
> cisco-voip at puck.nether.net
>
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
>  ------------------------------
>
> *Disclaimer: This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the designated
> addressee(s) named above only. If you are not the intended addressee, you
> are hereby notified that you have received this communication in error and
> that any use or reproduction of this email or its contents is strictly
> prohibited and may be unlawful. If you have received this communication in
> error, please notify us immediately by replying to this message and deleting
> it from your computer. Thank you. *
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080917/8e1ba4dd/attachment-0001.html>