[cisco-voip] MeetingPlace express VMware ESX

[Voice Noob]

Thanks but I said that I have already converted it in my original e-mail. I
did use the VMware tool . The problem is that the server image that is
shipped uses IDE drives and ESX does not support IDE. So during the
conversion proccess it converts it to SCSI and then when I start the vm the
GRUB loader does not boot the system.

On Mon, Sep 22, 2008 at 1:27 PM, Reto Gassmann <voip at mrga.ch> wrote:

>  Hi
>
> try to import the image with the VMWare Converter.
> http://www.vmware.com/products/converter/
> you can set source and destination and it converts the Image from VMServer
> to ESX.
>
>   ----- Original Message -----
> *From:* Voice Noob <voicenoob at gmail.com>
> *To:* cisco-voip at puck-nether.net
> *Sent:* Monday, September 22, 2008 8:18 PM
> *Subject:* [cisco-voip] MeetingPlace express VMware ESX
>
>
> Has anyone found a way to install Meetingplace 2.x in Vmware ESX? I know
> you can order the NFR from Cisco and they will send you a VMware image
> already configured. The problem is all I have at my company. ESX and not
> vmware server. I have tried to convert it and it will not boot.
>
> ------------------------------
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080922/0cdc9cad/attachment.html>