[cisco-voip] Route pattern question

[Jason Burns]

Lelio,

That's right - when you explicitly add the # to the end of the RoutePattern
you cannot match that by dialing without hitting the # key at the end.

You can see what pattern you're hitting by looking at the traces, or by
running dialed number analyzer.

On Mon, Sep 22, 2008 at 11:30 AM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:

>
> It's probably matching another route pattern, specific or not.
>
> Do you have any wildcard patterns that allow for 7 digit dialing? Or are
> you using the @ macro with a 7digit dialing filter?
>
> As far as I know, if your route pattern has a # in it, it won't work
> without it.
>
> I'm sure the list will deny/confirm that assumption.
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> "Bad grammar makes me [sic]" - Tshirt
>
>
>
> ----- Original Message -----
> From: "cisco.voip" <cisco.voip at verizon.net>
> To: cisco-voip at puck.nether.net
> Sent: Monday, September 22, 2008 11:16:58 AM GMT -05:00 US/Canada Eastern
> Subject: [cisco-voip] Route pattern question
>
> I have a route pattern that I need the user to press the # key to place the
> call.
> The route pattern is 5551212#, however, when the user dial 5551212 and
> waits
> a couple of seconds the
> call is dialed anyways. Is ther e a CCM setting to change I use CCMv4.2.
>
> Thanks
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080922/d4f7d80f/attachment.html>