[cisco-voip] vg224 sccp config

[Lelio Fulgenzi]

Here's a quick snapshot. 

    • this is SCCP config only, i have not included ip config, routing, loopback, etc. 
    • consider enabling all ports using the STCAP command and configuring all ports in callmanager regardless of whether there is an extension/DN on it or not. 
    • by configuring all ports and never deleting them, only removing the DNs, you are able to manage things without having to connect to the gateway to add/remove dial peers. 



! 
stcapp ccm-group <groupnum> 
stcapp 
! 
voice-card 0 
! 
! 
voice service voip 
modem passthrough nse codec g711ulaw 
! 
sccp ccm <ipaddr> identifier <idnum1> 
sccp ccm <ipaddr> identifier <idnum2> 
sccp 
! 
sccp ccm group <groupnum> 
associate ccm <idnum1> priority 1 
associate ccm <idnum2> priority 2 
! 
! 
dial-peer voice <dialpeer1> pots 
service stcapp 
port 2/0 
! 
dial-peer voice <dialpeer2> pots 
service stcapp 
port 2/1 
! 



--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"Bad grammar makes me [sic]" - Tshirt 


----- Original Message ----- 
From: "Joe Cisco" <smetsysocsic at gmail.com> 
To: cisco-voip at puck.nether.net 
Sent: Tuesday, September 23, 2008 11:55:47 AM GMT -05:00 US/Canada Eastern 
Subject: [cisco-voip] vg224 sccp config 

Does anyone have an example IOS sccp config for a vg224? I've never 
built any type of router as sccp, always been an mgcp kind of guy, but 
we want some of the advanced analog functionality sccp provides. Any 
tips/tricks anyone's learned or gotchas i need to be aware of? 

Joe C. 
_______________________________________________ 
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080923/17800e26/attachment.html>