[cisco-voip] MS OCS controlling Cisco Phones

[Matt Slaga (US)]

This can be done without CUPS, but you will require something to replace
that functionality.  Genesys GETS is another product that can do this.
CallManager cannot talk CSTA directly, which is where CUPS comes into
play.

 

You can configure OCS software/devices to place calls to and from Cisco
devices without CUPS however.  But in order to control the phones
(Remote Call Control), you need CUPS or GETS or another vendor product.

 

CUPS requires 1 DLU per user for presence enabled in CUPS 6.0 and later.


 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Carter, Bill
Sent: Tuesday, September 23, 2008 3:48 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] MS OCS controlling Cisco Phones

 

Can this be done without a Cisco Presence Server? Can Microsoft OCS
integrate with CallManager so OCS can control the phone? How many DLUs
are required for OCS integration?

 

 




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080923/b3ef0980/attachment.html>