[cisco-voip] CUCM upgrade path/tools
Robert Knapp
robert.knapp at spanlink.com
Tue Sep 23 18:34:16 EDT 2008
Make sure that you have ALL of the information required in the
directions and have your licensing handy
Thanks,
Robert Knapp
-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of
cisco-voip-request at puck.nether.net
Sent: Tuesday, September 23, 2008 1:04 PM
To: cisco-voip at puck.nether.net
Subject: cisco-voip Digest, Vol 59, Issue 193
Send cisco-voip mailing list submissions to
cisco-voip at puck.nether.net
To subscribe or unsubscribe via the World Wide Web, visit
https://puck.nether.net/mailman/listinfo/cisco-voip
or, via email, send a message with subject or body 'help' to
cisco-voip-request at puck.nether.net
You can reach the person managing the list at
cisco-voip-owner at puck.nether.net
When replying, please edit your Subject line so it is more specific
than "Re: Contents of cisco-voip digest..."
Today's Topics:
1. Re: Publisher - Subscriber syncing (Wes Sisk)
2. Re: call access control (Scott Voll)
3. Re: CUCM upgrade path/tools (Wes Sisk)
4. Re: HP server FYI (Matthew Loraditch)
5. Re: call access control (Ellington, Chris)
6. Re: Monitor status of line in CM 4.1 (Wes Sisk)
----------------------------------------------------------------------
Message: 1
Date: Tue, 23 Sep 2008 12:44:40 -0400
From: Wes Sisk <wsisk at cisco.com>
Subject: Re: [cisco-voip] Publisher - Subscriber syncing
To: Anthony Kouloglou <akoul at dataways.gr>
Cc: "cisco-voip at puck-nether.net" <cisco-voip at puck.nether.net>
Message-ID: <48D91CF8.2020702 at cisco.com>
Content-Type: text/plain; charset="iso-8859-7"; Format="flowed"
it depends, but most likely not. even though you don't change anything
there are still automated changes happening in the backend. 'utils
dbreplication reset' will get you and going if replication has stopped.
Scott's post is accurate on how to check replication state. You can also
use the CLI command 'utils dbreplication status'
admin:utils dbreplication ?
utils dbreplication clusterreset
utils dbreplication dropadmindb
utils dbreplication repair
utils dbreplication reset
utils dbreplication setrepltimeout
utils dbreplication status
utils dbreplication stop
admin:help utils dbreplication reset
utils dbreplication reset help:
usage: utils dbreplication reset [nodename]|all
Reset tears down and rebuilds replication. Use when replication setup
has failed after install/upgrade
You must execute "utils dbreplication stop" before using this command.
If reset all, stop replication on all nodes first.
If using reset <nodename>, stop replication on that node first.
/Wes
On 9/22/2008 8:18 AM, Anthony Kouloglou wrote:
> Hi, i have a 6.1(2) CUCM cluster.
> For some reasons, subscriber was out of the network for a couple of
> days (but none change occured to it).
> We changed some things in the publisher : added some phones, edited
> some others.
> As soon as i plugged in the subscriber in the network will it sync
> with the publisher and get the latest changes?
> How can i monitor the process and know it has finished?
>
> Chears,
> Anthony
>
------------------------------------------------------------------------
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<https://puck.nether.net/pipermail/cisco-voip/attachments/20080923/410ba
68c/attachment-0001.html>
------------------------------
Message: 2
Date: Tue, 23 Sep 2008 09:53:35 -0700
From: "Scott Voll" <svoll.voip at gmail.com>
Subject: Re: [cisco-voip] call access control
To: "Baris Gulten" <barisgulten at gmail.com>
Cc: cisco-voip at puck.nether.net
Message-ID:
<f84a38d30809230953v5eba3199j8928042abb2b9a11 at mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"
CSS
setup partitions and CSS to allow only this.
Scott
On Tue, Sep 23, 2008 at 8:10 AM, Baris Gulten <barisgulten at gmail.com>
wrote:
> Hi everybody,
>
> There is a boss. He accept calls only his secretary.
>
> How can i provide this feature.
>
>
>
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<https://puck.nether.net/pipermail/cisco-voip/attachments/20080923/e9b15
b45/attachment-0001.html>
------------------------------
Message: 3
Date: Tue, 23 Sep 2008 12:55:58 -0400
From: Wes Sisk <wsisk at cisco.com>
Subject: Re: [cisco-voip] CUCM upgrade path/tools
To: Mark J <markju at gmail.com>
Cc: "cisco-voip at puck.nether.net" <cisco-voip at puck.nether.net>
Message-ID: <48D91F9E.2060409 at cisco.com>
Content-Type: text/plain; charset="iso-8859-1"; Format="flowed"
follow the docs carefully:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/upgrade/6_1_2/upgrd61
2.html
you will be using several tools including upgrade assistant and dma.
there is an upgrade center located here that some folks thoroughly
appreciate:
http://www.cisco.com/iam/ucmproto/
it is for version 5.1 but many of the steps are the same.
/Wes
On 9/22/2008 9:03 AM, Mark J wrote:
> Hi guys,
>
> I wanted to know is there re any tools for upgrading CM4x to CUCM6?
>
> Thanks
>
------------------------------------------------------------------------
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<https://puck.nether.net/pipermail/cisco-voip/attachments/20080923/28718
8c2/attachment-0001.html>
------------------------------
Message: 4
Date: Tue, 23 Sep 2008 12:58:03 -0400
From: Matthew Loraditch <MLoraditch at heliontechnologies.com>
Subject: Re: [cisco-voip] HP server FYI
To: "cisco-voip at puck-nether.net" <cisco-voip at puck.nether.net>
Message-ID:
<530C67FE62559C42857C78B962454E621A336169 at hermes.helion.local>
Content-Type: text/plain; charset="us-ascii"
>From what I can tell all they did was bump the hard drives up to 146GB,
can we at least get some newer processors? Good grief
Matthew Loraditch
10944 Beaver Dam Road, Suite A
Hunt Valley, Maryland 21030
support at heliontechnologies.com<mailto:support at heliontechnologies.com>
(p) (410) 252-8830
(F) (443) 541-1593
Visit us at
www.heliontechnologies.com<http://www.heliontechnologies.com>
Support Issue? Email
support at heliontechnologies.com<mailto:support at heliontechnologies.com>
for fast assistance!
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Voice Noob
Sent: Tuesday, September 23, 2008 11:13 AM
To: cisco-voip at puck-nether.net
Subject: [cisco-voip] HP server FYI
It looks like CIsco has updated the hardware specs for using HP servers.
Just FYI.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<https://puck.nether.net/pipermail/cisco-voip/attachments/20080923/1e70a
c26/attachment-0001.html>
------------------------------
Message: 5
Date: Tue, 23 Sep 2008 12:59:07 -0400
From: "Ellington, Chris" <Chris.Ellington at inin.com>
Subject: Re: [cisco-voip] call access control
To: "Baris Gulten" <barisgulten at gmail.com>,
<cisco-voip at puck.nether.net>
Message-ID:
<8F9F1C6AA1D6834EACC379C8821533A60811A6DE at i3mail1.i3domain.inin.com>
Content-Type: text/plain; charset="us-ascii"
Place his extension in a partition that only his secretary can dial
(CSS). Make sure his CSS, however, can dial whatever numbers you need
him to dial
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Baris Gulten
Sent: Tuesday, September 23, 2008 11:11 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] call access control
Hi everybody,
There is a boss. He accept calls only his secretary.
How can i provide this feature.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<https://puck.nether.net/pipermail/cisco-voip/attachments/20080923/b2a51
cb9/attachment-0001.html>
------------------------------
Message: 6
Date: Tue, 23 Sep 2008 13:00:20 -0400
From: Wes Sisk <wsisk at cisco.com>
Subject: Re: [cisco-voip] Monitor status of line in CM 4.1
To: Chase Mergenthal <chase at nothingbutnetllc.com>
Cc: cisco-voip at puck.nether.net
Message-ID: <48D920A4.2070702 at cisco.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
In Attendant Console in the directory search you can see the status of
lines including busy/idle status so long as your search returns less
than 10 or so results.
On 9/23/2008 10:52 AM, Chase Mergenthal wrote:
> In call manager 4.1 is there a way to have a line on a phone where
> someone can see if there is a VM on a line or see if someone is on the
> line, but not answer calls on that line? I have a line shared on 4
> phones, and 3 out of the 4 are accidentally picking up calls, when all
> they want to do is monitor the line...
> I set "Ring Setting (Phone Idle)" and "Ring Setting (Phone Active)**"
> to disable.
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
------------------------------
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
End of cisco-voip Digest, Vol 59, Issue 193
*******************************************
More information about the cisco-voip
mailing list