[cisco-voip] vg224 sccp config

Ryan Ratliff rratliff at cisco.com
Wed Sep 24 09:43:27 EDT 2008


Unless the VG224 won't register without a DN then just adding the device to
CCMAdmin is all that is required to stop the transients.  Other devices
(phones, VG248) will register without a DN just fine.
 

-Ryan 

 

  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jason Aarons (US)
Sent: Tuesday, September 23, 2008 5:26 PM
To: Lelio Fulgenzi; Joe Cisco
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] vg224 sccp config



Make sure you put a dn on all lines, else every vg224 port will try to
autoregister filling up your log files if you have auto-register off -jason

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi
Sent: Tuesday, September 23, 2008 4:33 PM
To: Joe Cisco
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] vg224 sccp config

 

I think it's important to give credit where credit is due....Ed Leatherman
suggested the "configure all" approach....thanks Ed.


---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"Bad grammar makes me [sic]" - Tshirt


----- Original Message -----
From: "Lelio Fulgenzi" <lelio at uoguelph.ca>
To: "Joe Cisco" <smetsysocsic at gmail.com>
Cc: cisco-voip at puck.nether.net
Sent: Tuesday, September 23, 2008 2:46:44 PM GMT -05:00 US/Canada Eastern
Subject: Re: [cisco-voip] vg224 sccp config

Here's a quick snapshot. 

*	this is SCCP config only, i have not included ip config, routing,
loopback, etc. 

*	consider enabling all ports using the STCAP command and configuring
all ports in callmanager regardless of whether there is an extension/DN on
it or not. 

*	by configuring all ports and never deleting them, only removing the
DNs, you are able to manage things without having to connect to the gateway
to add/remove dial peers. 

 

  _____  

!
stcapp ccm-group <groupnum>
stcapp
!
voice-card 0
!
!
voice service voip
 modem passthrough nse codec g711ulaw
!
sccp ccm <ipaddr> identifier <idnum1>
sccp ccm <ipaddr> identifier <idnum2>
sccp
!
sccp ccm group <groupnum>
 associate ccm <idnum1> priority 1
 associate ccm <idnum2> priority 2
!
!
dial-peer voice <dialpeer1> pots
 service stcapp
 port 2/0
!
dial-peer voice <dialpeer2> pots
 service stcapp
 port 2/1
!

  _____  

 


---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"Bad grammar makes me [sic]" - Tshirt


----- Original Message -----
From: "Joe Cisco" <smetsysocsic at gmail.com>
To: cisco-voip at puck.nether.net
Sent: Tuesday, September 23, 2008 11:55:47 AM GMT -05:00 US/Canada Eastern
Subject: [cisco-voip] vg224 sccp config

Does anyone have an example IOS sccp config for a vg224? I've never
built any type of router as sccp, always been an mgcp kind of guy, but
we want some of the advanced analog functionality sccp provides. Any
tips/tricks anyone's learned or gotchas i need to be aware of?

Joe C.
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


_______________________________________________ cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip 


  _____  

Disclaimer: This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the designated
addressee(s) named above only. If you are not the intended addressee, you
are hereby notified that you have received this communication in error and
that any use or reproduction of this email or its contents is strictly
prohibited and may be unlawful. If you have received this communication in
error, please notify us immediately by replying to this message and deleting
it from your computer. Thank you. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080924/13ddd39d/attachment.html>


More information about the cisco-voip mailing list