[cisco-voip] vg224 sccp config

[Joe Cisco]

Forgive my ignorance but could you utilize the "ccm-manager config"
option to allow callmanager to generate the configs for the ports as
needed? Or does this only work with MGCP?

-Joe C.

On Wed, Sep 24, 2008 at 9:45 AM, Darren Pedley <darren at dnsl.com> wrote:
> Hi,
>
> I don't think you have to add a DN, I think you can just select the "port"
> with the yellow ?, then click save.  It will save the port as configured
> with defaults and you don't have to add a DN.... I think, don't have one in
> front of me.
>
> As mentioned this is much better from a management perspective, I mean who
> wants to telnet to things these days ;).....
>
> D
>
>
> On Wed, Sep 24, 2008 at 8:53 PM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
>>
>> The thought behind creating a dialpeer and activating stcapp for all ports
>> is to eliminate the need to telnet into the vg224 each time you need to
>> activate a port. For those of us with MAC desks, it's easier to have them
>> simply add a DN to an existing and already configured vg224 port (device)
>> then it is to have them telnet and create a dialpeer or have to wait until
>> we do it.
>>
>> ymmv
>>
>>
>> --------------------------------------------------------------------------------
>> Lelio Fulgenzi, B.A.
>> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
>> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>> "Bad grammar makes me [sic]" - Tshirt
>>
>> ----- Original Message -----
>> From: Paul
>> To: Jason Aarons (US) ; Lelio Fulgenzi ; Joe Cisco
>> Cc: cisco-voip at puck.nether.net
>> Sent: Wednesday, September 24, 2008 2:22 AM
>> Subject: Re: [cisco-voip] vg224 sccp config
>> It's safe to say that if you should only activate stcapp on the ports
>> you're going to use or they're constantly flood your CCM cluster with
>> register attempts. Therefore only create stcapp dial peers for the ports
>> you'll use.
>> ----- Original Message ----
>> From: Jason Aarons (US) <jason.aarons at us.didata.com>
>> To: Lelio Fulgenzi <lelio at uoguelph.ca>; Joe Cisco <smetsysocsic at gmail.com>
>> Cc: cisco-voip at puck.nether.net
>> Sent: Wednesday, September 24, 2008 6:25:59 AM
>> Subject: Re: [cisco-voip] vg224 sccp config
>>
>> Make sure you put a dn on all lines, else every vg224 port will try to
>> autoregister filling up your log files if you have auto-register off -jason
>>
>>
>>
>> From: cisco-voip-bounces at puck.nether.net
>> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi
>> Sent: Tuesday, September 23, 2008 4:33 PM
>> To: Joe Cisco
>> Cc: cisco-voip at puck.nether.net
>> Subject: Re: [cisco-voip] vg224 sccp config
>>
>>
>>
>> I think it's important to give credit where credit is due....Ed Leatherman
>> suggested the "configure all" approach....thanks Ed.
>>
>>
>> ---
>> Lelio Fulgenzi, B.A.
>> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
>> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>> "Bad grammar makes me [sic]" - Tshirt
>>
>>
>> ----- Original Message -----
>> From: "Lelio Fulgenzi" <lelio at uoguelph.ca>
>> To: "Joe Cisco" <smetsysocsic at gmail.com>
>> Cc: cisco-voip at puck.nether.net
>> Sent: Tuesday, September 23, 2008 2:46:44 PM GMT -05:00 US/Canada Eastern
>> Subject: Re: [cisco-voip] vg224 sccp config
>>
>> Here's a quick snapshot.
>>
>> this is SCCP config only, i have not included ip config, routing,
>> loopback, etc.
>> consider enabling all ports using the STCAP command and configuring all
>> ports in callmanager regardless of whether there is an extension/DN on it or
>> not.
>> by configuring all ports and never deleting them, only removing the DNs,
>> you are able to manage things without having to connect to the gateway to
>> add/remove dial peers.
>>
>>
>>
>> ________________________________
>>
>> !
>> stcapp ccm-group <groupnum>
>> stcapp
>> !
>> voice-card 0
>> !
>> !
>> voice service voip
>>  modem passthrough nse codec g711ulaw
>> !
>> sccp ccm <ipaddr> identifier <idnum1>
>> sccp ccm <ipaddr> identifier <idnum2>
>> sccp
>> !
>> sccp ccm group <groupnum>
>>  associate ccm <idnum1> priority 1
>>  associate ccm <idnum2> priority 2
>> !
>> !
>> dial-peer voice <dialpeer1> pots
>>  service stcapp
>>  port 2/0
>> !
>> dial-peer voice <dialpeer2> pots
>>  service stcapp
>>  port 2/1
>> !
>>
>> ________________________________
>>
>>
>>
>> ---
>> Lelio Fulgenzi, B.A.
>> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
>> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>> "Bad grammar makes me [sic]" - Tshirt
>>
>>
>> ----- Original Message -----
>> From: "Joe Cisco" <smetsysocsic at gmail.com>
>> To: cisco-voip at puck.nether.net
>> Sent: Tuesday, September 23, 2008 11:55:47 AM GMT -05:00 US/Canada Eastern
>> Subject: [cisco-voip] vg224 sccp config
>>
>> Does anyone have an example IOS sccp config for a vg224? I've never
>> built any type of router as sccp, always been an mgcp kind of guy, but
>> we want some of the advanced analog functionality sccp provides. Any
>> tips/tricks anyone's learned or gotchas i need to be aware of?
>>
>> Joe C.
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>> _______________________________________________ cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>> ________________________________
>>
>> Disclaimer: This e-mail communication and any attachments may contain
>> confidential and privileged information and is for use by the designated
>> addressee(s) named above only. If you are not the intended addressee, you
>> are hereby notified that you have received this communication in error and
>> that any use or reproduction of this email or its contents is strictly
>> prohibited and may be unlawful. If you have received this communication in
>> error, please notify us immediately by replying to this message and deleting
>> it from your computer. Thank you.
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>
>