[cisco-voip] group pickup n the hunt list

[James Buchanan]

Yes. You have to enable CSCsb42763 by entering that value under System,
Enterprise Parameters, Cisco Support Use Only. This allows you to apply
a call pickup group to a hunt pilot, then you can do this.  The CUCM
6.1(2) release notes specifically mention this, though I know it has
worked since 4.1.

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Mohammed
Naviwala
Sent: Wednesday, September 24, 2008 3:59 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] group pickup n the hunt list

 

hi guys

 

is group pick up supported for the devices in the hunt list???

-- 
Best Regards

Mohammed Abdul Razzaq



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080924/ee31169d/attachment.html>