[cisco-voip] ATA 186 vs FAX G3

[Scott Voll]

Don't know what MCE is.

but Things to find out.  are the VGWs set to Fax passthrough? (Fax Relay
bad)

is it set to G711 all the way through?

is the fax set to G3 (14.4) and ECM (error Correction Mode) off?

Scott

On Mon, Sep 29, 2008 at 3:59 AM, ANDRIANALY Daniel
<dandrianaly at axians.com>wrote:

>  Hi all,
>
>
>
> I work with a ccm 6.1.2, an ATA 186 and I would like to send a fax (the fax
> mode is G3). I can hear ring on a fax but I don't get data.
>
> If I send to a fax on mode MCE, it's OK
>
>
>
> Regards,
>
>
>
> Daniel
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080929/43baf393/attachment.html>