[cisco-voip] Oregano Intercom System

[Mike Hawley (AU)]

Hi Guys, has anyone had any experience with Oregano intercom systems used in car parking devices, connecting to CUCM, Call Manager for that matter?

The device has a oregano board built into it that is meant to be H323.  I have created H323 client endpoints and used intercom programming in CUCM, as well as traditional PLAR type programming and nothing seems to get this device to make an outbound call.  I am in process of capturing Ethereal trace as well, and will post if this helps...

Development System
 ]]]]]]]]]]]]]]]]]]]]]]]]]]]]
 ]]]]]]]]]]]]]]]]]]]]]]]]]]]       VxWorks version 5.4.1
 ]]]]]]]]]]]]]]]]]]]]]]]]]]       KERNEL: WIND version 2.5
 ]]]]]]]]]]]]]]]]]]]]]]]]]       Copyright Wind River Systems, Inc., 1984-1999

                               CPU: IPT ARM - ARM940T (ARM).  Processor #0.
                              Memory Size: 0x800000.  BSP version 1.2.3.
                             WDB: Ready.



Thanks

Mike


******************************************************************************
 - NOTICE FROM DIMENSION DATA AUSTRALIA
This message is confidential, and may contain proprietary or legally privileged information.  If you have received this email in error, please notify the sender and delete it immediately.

Internet communications are not secure. You should scan this message and any attachments for viruses.  Under no circumstances do we accept liability for any loss or damage which may result from your receipt of this message or any attachments.
******************************************************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080930/4b507016/attachment-0001.html>