[cisco-voip] PRI Failover

[Paul]

One would *think* if the two PRIs are in a route group, they would failover without issue. One quick way to test this out is to shutdown one of the PRIs and make a quick call...assuming they're not in current use.




________________________________
From: Matthew Loraditch <MLoraditch at heliontechnologies.com>
To: Paul <asobihoudai at yahoo.com>; Cisco VOIP <cisco-voip at puck.nether.net>
Sent: Wednesday, April 1, 2009 12:08:28 PM
Subject: RE: [cisco-voip] PRI Failover


I am on MGCP,  and the PRIs are
in two different routers at different sites
 
Matthew Loraditch
1965 Greenspring Drive
Timonium, MD 21093 
support at heliontechnologies.com
(p) (410) 252-8830
(F) (443) 541-1593

Visit us at www.heliontechnologies.com 
Support Issue? Email support at heliontechnologies.com for fast assistance!
 
From:Paul
[mailto:asobihoudai at yahoo.com] 
Sent: Wednesday, April 01, 2009 12:06 PM
To: Matthew Loraditch; Cisco VOIP
Subject: Re: [cisco-voip] PRI Failover
 
If you're using H.323 and you have a dial-peer for each PRI
in successive priorities, the calls should failover to the functional PRI.

Paul
 

________________________________

From:Matthew Loraditch
<MLoraditch at heliontechnologies.com>
To: Cisco VOIP <cisco-voip at puck.nether.net>
Sent: Wednesday, April 1, 2009 11:54:45 AM
Subject: [cisco-voip] PRI Failover
I am hoping this is the case but am unsure. If I have 2 PRIs
in a route group and one goes down (D-channel is reflected as down on router)
will CCM automatically send calls to the second PRI or does this require manual
intervention?
 
 
Matthew Loraditch
1965 Greenspring Drive
Timonium, MD 21093 
support at heliontechnologies.com
(p) (410) 252-8830
(F) (443) 541-1593

Visit us at www.heliontechnologies.com 
Support Issue? Email support at heliontechnologies.com for fast assistance!