[cisco-voip] PRI Failover

[Larry Hadrava]

Matthew:
If they are h323 gateways then Call Manager would not know if the PRI is
down or up.
If they are MGCP this should be handled by the call manager.

Is this in a lab or production enviroment?
Either way you should test to make usre that the desired results are
achieved.

Also - you need to make sure that your 911 dial pattern will only point to
the proper gateway so you don't call emergency services from location A and
have the call go out the GW at location B.

Larry Hadrava
CCIE #12203 CCNP CCNA
Sr. Support Engineer – IPexpert, Inc.
URL: http://www.IPexpert.com


On Wed, Apr 1, 2009 at 11:54 AM, Matthew Loraditch <
MLoraditch at heliontechnologies.com> wrote:

>  I am hoping this is the case but am unsure. If I have 2 PRIs in a route
> group and one goes down (D-channel is reflected as down on router) will CCM
> automatically send calls to the second PRI or does this require manual
> intervention?
>
>
>
>
>
> *Matthew Loraditch*
> 1965 Greenspring Drive
>
> Timonium, MD 21093
> support at heliontechnologies.com
> (p) (410) 252-8830
> (F) (443) 541-1593
>
> Visit us at www.heliontechnologies.com
> Support Issue? Email support at heliontechnologies.com for fast assistance!
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090401/b1d141a8/attachment.html>