[cisco-voip] Intercluster Trunk

Ryan Ratliff rratliff at cisco.com
Thu Apr 2 23:23:15 EDT 2009


Check to make sure your route list is registered.   If not try resetting it
or pointing your route pattern directly at the trunk rather than using a
RG/RL.

 

-Ryan

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Tanner Ezell
Sent: Thursday, April 02, 2009 11:16 PM
To: VOIP Group
Subject: [cisco-voip] Intercluster Trunk

 

Hey all, I'm using CUCM v7 in my lab and I'm having a hard time getting an
ICT (non-gk) working between CUCM publishers. Assuming a virgin install, I
created a trunk, set the ip of the other publisher. I created a route group
containing the trunk, I created a route list containing the route group, and
a route pattern pointing to the route list. When i attempt to dial the other
side, i get fast busy and I see no call signaling from my call manager to
the other publisher. Can anyone provide some insight on where to look? I'm
out of ideas.

 

Thanks all.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090402/2918396c/attachment.html>


More information about the cisco-voip mailing list