[cisco-voip] translation rule and CCM

[Duy Nguyen]

I must configure prefix digits in CCM?
No need since the user is dialing 0 then the number.

dial-peer in voicegatewayB?
Is this a gateway registered to a GK?  Why would CCM use this as a path to
get to the GK?

new zone prefix in GK? How can I do?
Add this command

zone prefix GK 0

On Tue, Apr 7, 2009 at 8:54 AM, Roby <granata77 at libero.it> wrote:

> Hi.
> I need your help, please..
>
> I have this scenario:
>
> - Call Manager 4.1 with a route pattern configuration as 0! (in partitionA)
> in exit trunk_1
>
> - Gatekeeper with a zone prefix 0* at VoicegatewayA
>
> - I must configure a new VoicegatewayB in order that: a phone in partitionB
> need to match a new zone prefix 0! (in partitionB) in the same GK but direct
> to VoicegatewayB
>
> I must configure prefix digits in CCM? dial-peer in voicegatewayB? new zone
> prefix in GK? How can I do?
>
> Thanks in advance.
> bye
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090407/41a8a028/attachment.html>