[cisco-voip] The correct answer is training

[Craig Staffin]

not exactly how you are thinking but there is a device that Bogen makes that
has a timer that will close the connection from the VGW to the paging
system.


On Tue, Apr 7, 2009 at 8:05 AM, Kevin Dunn <cheesevoice at gmail.com> wrote:

> in production, analog phones are used on the line to Page overhead when
> more product is needed.
> sometimes these phones do not get hung up and the EMS ports stays seized
> and paging is unusable
>
> The correct answer is to train the line workers to hang up the phone after
> their 10 second call.
> I know that.
>
> BUT since my attempts to train have ended in my increased stress level....
>
> Is there a way to "timeout reset" the paging ports on my voicegateway.
>
> Currently the ports are set H323 but I can make them MGCP is need be.
>
> config to follow
>
> *voice-port 1/1/0*
> *description Plant Paging*
> *auto-cut-through*
> *type 5*
> *signal immediate*
> *input gain -6*
> *output attenuation -6*
> *no comfort-noise*
> *timeouts call-disconnect 3*
> **
> *dial-peer voice 10 pots*
> *destination pattern 77[0-2]*
> *port 1/1/0*
> *forward-digits 1*
> *prefix ,*
> **
> Thanks in advance.
>
> Kevin
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090408/22c78815/attachment.html>