[cisco-voip] CUCME - How to Add prefix when calling a directory entry?

[Duy Nguyen]

In your CCM service parameter, put a 0 in the field of "Incoming Calling
Party National Number Prefix - Phone".


2009/4/10 Anthony Kouloglou <akoul at dataways.gr>

>  Hi, in a CUCM 7.0(1) running on 12.4.22.T1, we have a Local Directory
> with numbers like 23XXXXXXXX.
> We use a prefix 0 to call outside PSTN lines.
> Suppose i have:
>  directory entry 10 2312345678 name Test TESTTEST
> if 2312345678 calls, TESTTEST Test appears in my LCD screen,
> I noticed that if i put 0 in the directory enries, in order to call them
> directly, there in no caller name display in incoming calls.
> So, is it possible to put somewhere in the config the prefix 0 so when i
> call a directory entry, a 0 is added?
>
> Thanks
> Anthony
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090410/5fa9d3c8/attachment.html>