[cisco-voip] FW: Caller ID

[Kelemen Zoltan]

Obviously, the Telco disagrees :-)

Basically, it's up to the Telco, and if they choose to set it that way 
(to only accept CallerID from calls configured as national) they can do so.

I used to leave all unknown as well, and just recently ran into an 
issue, where I was getting incoming CallerID's from the telco, with 
dialing prefixes ripped off, and "proper" ISDN types. So I had to put 
the prefixes back, based on the type (00 for international, 0 for 
national over here)

putting a voice translation on the voice-port of the gateway could fix 
it easily. (probably it can be set from CUCM as well, but I used it on a 
CCME, so right now I have no idea, how )

regards,
   Zoltan

On 04/15/2009 05:55 PM, Jason Aarons (US) wrote:
>
> When the customer dials out he passes 7047474900 to Telco switch but 
> my callerid shows 7047473200 his main billing number.  He opened a 
> ticket with BellSouth/AT&T  Telco who told him the plan/type being 
> wrong causes the wrong number to show up. They used to have 1 main 
> number but now have 3 divisions, each having their own main number and 
> Telco had told him previously these numbers were ready to advertise 
> out PRI. I setup 3 CSSs with Route Lists having external mask.
>
> This Telco tech’s advice doesn’t sound right to me, I believe that 
> type/plan doesn’t affect calling party number delivery and Telco 
> person is looking at the wrong thing….Anyone disagree?
>
> *From:* Bobby
> *Sent:* Tuesday, April 14, 2009 3:19 PM
> *To:* Jason Aarons (US)
> *Subject:* Caller ID
>
> I placed a trouble ticket to AT&T on the Caller ID issue.  In looking 
> at our debug they said that the "Plan" and "Type" should be 'national' 
> or 'E164'.
>
> bay-2811-annex1#
>
> 030800: Apr 15 09:47:15.473 DST: ISDN Se0/0/0:23 Q931: TX -> SETUP pd 
> = 8  callref = 0x1F19
>
>         Bearer Capability i = 0x8090A2
>
>                 Standard = CCITT
>
>                 Transfer Capability = Speech
>
>                 Transfer Mode = Circuit
>
>                 Transfer Rate = 64 kbit/s
>
>         Channel ID i = 0xA98397
>
>                 Exclusive, Channel 23
>
>         Calling Party Number i = 0x0081, '7047474900'
>
>                 Plan:Unknown, Type:Unknown
>
>         Called Party Number i = 0x80, '19043383245'
>
>                 Plan:Unknown, Type:Unknown
>
> ------------------------------------------------------------------------
>
> *Disclaimer: This e-mail communication and any attachments may contain 
> confidential and privileged information and is for use by the 
> designated addressee(s) named above only. If you are not the intended 
> addressee, you are hereby notified that you have received this 
> communication in error and that any use or reproduction of this email 
> or its contents is strictly prohibited and may be unlawful. If you 
> have received this communication in error, please notify us 
> immediately by replying to this message and deleting it from your 
> computer. Thank you. *
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>    

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090416/9ad0c348/attachment.html>