[cisco-voip] Hunt list

[Turpin, Mark]

Scott,

 

So I'd peek at your hunt pilot settings and control the behavior there
instead of putting your VM line group in your hunt list.

 

When you're calling the hunt pilot DN and hunting to the voicemail ports
after a RNA timeout, it is as if you're dialing in to check your
mailbox.

 

--

MARK TURPIN  |  Systems Engineer  |  CCIE 21649 |  Insight Networking |
www.insight.com

t. 314.656.2315   c. 314.277.7948   f. 314.656.2355
mark.turpin at insight.com <mailto:mark.turpin at insight.com>  

 

The information contained in this message and any attachment may contain
privileged or confidential information protected from disclosure. If you
are not the intended recipient, or an employee or agent responsible for
delivering this message to the intended recipient, you are hereby
notified that any review, dissemination, distribution or copying of this
information is strictly prohibited.  If you have received this
transmission in error, please notify the sender immediately by replying
to this message and destroying the original and all copies.  Thank you.

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Scott Voll
Sent: Monday, April 20, 2009 11:52 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Hunt list

 

I have a Hunt list that points to a broadcast line group and my VM Line
group.

 

Currently if the call is not answered it goes to unity and asks for the
password.

 

do I just need to click the "for Voice Mail Usage" on the hunt list to
fix this.  I'm not finding real documentation on this check box. thus
the reason I ask.

 

Thanks

 

Scott

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090420/f54469e5/attachment.html>