[cisco-voip] Cisco Call Manager Express Multiple SIP accounts

[Khorshed]

Thanks Matt  for your input.  However, still i'm trying to archive it like
...



dial-peer voice 10 pots
destination-pattern 0151234
port 2/0
authentication username 0151234 password 12345

.and so on ...

Thanks & Regards,
Khorshed




On Tue, Apr 21, 2009 at 9:04 PM, Matt Slaga (US)
<Matt.Slaga at us.didata.com>wrote:

> It would be possible, but at that point you may want to look at a single
> device solution such as evangelyze.net smartsip, a sip termination box
> from dialogic or even a single asterisk box.
>
>
>
> -----Original Message-----
> From: Paul [mailto:asobihoudai at yahoo.com]
> Sent: Tuesday, April 21, 2009 8:35 AM
> To: Matt Slaga (US); Khorshed; cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] Cisco Call Manager Express Multiple SIP
> accounts
>
>
> Would it be possible to have several different SIP gateways on your
> network from different SIP-UAs which would then be connected to your
> CCME box?
>
>
>
> ________________________________
> From: Matt Slaga (US) <Matt.Slaga at us.didata.com>
> To: Khorshed <khorshed4u at gmail.com>; cisco-voip at puck.nether.net
> Sent: Tuesday, April 21, 2009 8:26:02 AM
> Subject: Re: [cisco-voip] Cisco Call Manager Express Multiple SIP
> accounts
>
>
> That is not possible with CME (or CCM AFAIK).  You will need to
> request that they bundle all sip trunks into a single authentication
> request.
> Most small providers will not do this, so you may need to find a new SIP
> provider that can provide this.
>
> From:cisco-voip-bounces at puck.nether.net<From%3Acisco-voip-bounces at puck.nether.net>
> [mailto:cisco-voip-bounces at puck.nether.net] On
> Behalf Of Khorshed
> Sent: Tuesday, April 21, 2009 2:06 AM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] Cisco Call Manager Express Multiple SIP accounts
>
> Dear all,
> Does any one assist me to configure multiple sip account register on
> CME, I'm trying to configure more than one SIP account in CME. I have 5
> numbers taken from the same SIP   provider, but each one with different
> username and password.It's possible to do authentication at dial-peer
> level? Or is there any trick to do this in other way?
> Thanks
> Khorshed
>
>
> ________________________________
>
> Disclaimer: This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the designated
> addressee(s) named above only.  If you are not the intended addressee,
> you are hereby notified that you have received this communication in
> error and that any use or reproduction of this email or its contents is
> strictly prohibited and may be unlawful.  If you have received this
> communication in error, please notify us immediately by replying to this
> message and deleting it from your computer. Thank you.
>
>
>
>
>
> -----------------------------------------
> Disclaimer:
>
> This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the
> designated addressee(s) named above only.  If you are not the
> intended addressee, you are hereby notified that you have received
> this communication in error and that any use or reproduction of
> this email or its contents is strictly prohibited and may be
> unlawful.  If you have received this communication in error, please
> notify us immediately by replying to this message and deleting it
> from your computer. Thank you.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090421/03336d9f/attachment.html>