[cisco-voip] Unified Communications Manager 7 PRI Programming/Setup Question

[Matthew Loraditch]

It may not be in call manager and if it is what's there still might not be the best indicator as you could be doing something on your gateway to modify the digits, best thing to do is log into one of your voice gateways and do a debug isdn q931 and watch a couple of calls inbound to see what's coming across


Matthew Loraditch
1965 Greenspring Drive
Timonium, MD 21093
support at heliontechnologies.com<mailto:support at heliontechnologies.com>
(p) (410) 252-8830
(F) (443) 541-1593

Visit us at www.heliontechnologies.com<http://www.heliontechnologies.com>
Support Issue? Email support at heliontechnologies.com<mailto:support at heliontechnologies.com> for fast assistance!

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Miller, Steve
Sent: Thursday, April 23, 2009 10:46 AM
To: Cisco VOIP
Subject: [cisco-voip] Unified Communications Manager 7 PRI Programming/Setup Question

I am ordering a couple of PRIs from the telco and their PRI form asks how many "digits outpulsed".  We have 5-digit internal dialing, but all of our DIDs at the location in question have the same exchange so only the last 4 digits are unique.  We are currently on Call Manager 4.1, but we will be going to CUCM 7 when we used these PRIs; I assume the parameters for 4.1 and 7 would be the same.  Where do I look on our current Call Manager to see what we are currently doing so that I can tell the engineer at the telco what she needs to know? Please point me in the right direction.  Thank you!


Steve Miller
Telecom Engineer
Dickstein Shapiro LLP
1825 Eye Street NW | Washington, DC 20006
Tel (202) 420-3370| Fax (202) 330-5607
MillerS at dicksteinshapiro.com<mailto:MillerS at dicksteinshapiro.com>


--------------------------------------------------------

This e-mail message and any attached files are confidential and are intended solely for the use of the addressee(s)

named above. This communication may contain material protected by attorney-client, work product, or other

privileges. If you are not the intended recipient or person responsible for delivering this confidential

communication to the intended recipient, you have received this communication in error, and any review, use,

dissemination, forwarding, printing, copying, or other distribution of this e-mail message and any attached files

is strictly prohibited. Dickstein Shapiro reserves the right to monitor any communication that is created,

received, or sent on its network.  If you have received this confidential communication in error, please notify the

sender immediately by reply e-mail message and permanently delete the original message.



To reply to our email administrator directly, send an email to postmaster at dicksteinshapiro.com



Dickstein Shapiro LLP

http://www.DicksteinShapiro.com



==============================================================================
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090423/9b286501/attachment.html>