[cisco-voip] Unified Communications Manager 7 PRI Programming/Setup Question

[Ed Leatherman]

Ahh I see. We just get all 10 as well.

On Thu, Apr 23, 2009 at 11:03 AM, Matthew Loraditch
<MLoraditch at heliontechnologies.com> wrote:
> That would be how many digits CCM is looking at it's not neccesarily how many digits the telco is sending, in theory you could get all 10 from the PRI but set CCM to only look at the last 4.  I think Steve is looking for how many his telco is sending on his current PRI. Personally I prefer to get all 10 and translate them but I digress
>
>
> Matthew Loraditch
> 1965 Greenspring Drive
> Timonium, MD 21093
> support at heliontechnologies.com
> (p) (410) 252-8830
> (F) (443) 541-1593
>
> Visit us at www.heliontechnologies.com
> Support Issue? Email support at heliontechnologies.com for fast assistance!
>
Ed Leatherman
Assistant Director, Voice Services
West Virginia University
Telecommunications and Network Operations