[cisco-voip] Use DMA tar file on different Hardware

[James Buchanan]

Did you retrieve the file from the D:\DMA folder on your 4.1(3) box? I
think that's the file it's also looking for.

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Anthony
Kouloglou
Sent: Thursday, April 23, 2009 11:54 AM
To: cisco voip
Subject: [cisco-voip] Use DMA tar file on different Hardware

 

Hi here is my case:
1. i have a 4.1(3) Call Manager on a Hardware that does not support
6.1(2)
2. I have used DMA and created a tar file and an xml file (dma with
warnings about LDAP that i can't really decrypt, but no errors so i
guess it is ok)

In a new purchased HW and 6.1 software, i have also a valid node license
I used the 6.1(2) installation CD and answered yes, that i have a backup
during the first steps.
When time has come after reboot, i filled the FTP info (ftp server, ftp
path, username, pwd etc) but it seems that it cannot find a valid batch
file!
The tar and xml do exist in the root direction of the ftp server, i can
see CUCM logging in the root but not finding anything.


Is there a problem that the installation is moving to another HW or is
it something else?
Is there something in the xml file or in the ini file inside the tar
that is being checked during this point?

Thanks
Anthony

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090423/8e62d581/attachment.html>