[cisco-voip] IP Communicator strangeness

[Beck, Christopher]

We are using IP Communicator for a few users on their laptops.  We have
a reproducible issue for a couple of people and I am wondering if anyone
else has seen it.

 

When MWI is set, IP Communicator begins toggling the line onhook/offhook
continuously.  If you clear MWI for that line, the light turns off but
the line toggling continues.  You have to close IP Communicator, clear
the light, and then restart IP Communicator.

 

We have reproduced it with multiple machines and on versions 2.1.3 and
2.1.4.

 

Anybody else seen this?

 

-Chris

 

Chris Beck

IT Lead - Voice Technologies

USG Corporation

cbeck at usg.com

 



Confidentiality Notice: This email is intended for the sole use of the intended recipient(s) and may contain confidential, proprietary or privileged information. If you are not the intended recipient, you are notified that any use, review, dissemination, copying or action taken based on this message or its attachments, if any, is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy or delete all copies of the original message and any attachments. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090424/3f952c67/attachment.html>