[cisco-voip] SRST & Line Groups (non public DN's)

[Matthew Linsemier]

Hey all,

I¹m looking for some suggestions on what is the best way to handle a Line
Group in a SRST situation.  In our configuration we have a few remote
offices that have a configuration similar to the following:

> 1234 (real DN)
> 5100
> 5101
> 5102
> 5103

The first line is the personal DN for the employee and the remaining four
lines are configured in a line group, hunt list, and pilot configuration.
When call manager is up, the hunt pilots all ring to the line group starting
at 5100, top down.

When the SRST is enabled due to the MPLS WAN being down, these lines will
register with the phone, however the 5100-5103 numbers aren¹t valid E.164
numbers.  Is the best way to make sure that our pilots that are in call
manager ring down to 5100 or maybe even map one to one still to use the
alias command?

...
Alias 1 5678 to 5100
Alias 2 5679 to 5101
...

If so, is there a way to simulate line group functionality?  Any input would
be greatly apprecaited.

Matt

CONFIDENTIALITY STATEMENT
This communication and any attachments are CONFIDENTIAL and may
be protected by one or more legal privileges. It is intended
solely for the use of the addressee identified above. If you
are not the intended recipient, any use, disclosure, copying
or distribution of this communication is UNAUTHORIZED. Neither
this information block, the typed name of the sender, nor
anything else in this message is intended to constitute an
electronic signature unless a specific statement to the
contrary is included in this message. If you have received this
communication in error, please immediately contact me and delete
this communication from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090427/73ebe5f9/attachment.html>