[cisco-voip] Difference between "voice translation-rule" and "translation-rule"

Tue Apr 28 10:08:26 EDT 2009

Per Cisco documentation. . . 

Voice Translation Rules are applied to Voice Translation Profiles. These profiles are then applied to dial peers or voice ports. Profiles can be applied to VoIP or POTS dial peers or voice ports, and can be applied to inbound or outbound calls. A profile can translate Called, Calling, or Redirecting numbers.

Please see this URL for more information.

http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a0080325e8e.shtml

If you need to apply it to all calls, then put it on your voice-port. It sounds like that's what you're going to have to do.

Again, get rid of this crap.

translation-rule 2
 Rule 1 ^. 0 national national
 Rule 2 ^. 00 international international
!
!
translation-rule 5
 Rule 0 860 600

These commands are deprecated.

________________________________
From: Robin Clayton <Robin.Clayton at rrca.org.uk>
To: cisco-voip at puck.nether.net
Sent: Tuesday, April 28, 2009 9:37:11 AM
Subject: Re: [cisco-voip] Difference between "voice translation-rule" and "translation-rule"

Hmm

I wonder how it works now then for the 860 translation. 

Does it actually change the number as I have no dial-peer that matches 600 ( 600 being the unity pilot )

Full Config..
—-----------

Current configuration : 3887 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname CARL-VG2811-1
!
boot-start-marker
boot-end-marker
!
enable secret "it's quite secure realy"
!
no aaa new-model
!
resource policy
!
network-clock-participate wic 0
ip subnet-zero
!
!
ip cef
!
!
isdn switch-type primary-net5
!
voice-card 0
 no dspfarm
!
!
voice call send-alert
voice call convert-discpi-to-prog
voice call carrier capacity active
voice rtp send-recv
!
voice service voip
 allow-connections h323 to h323
 allow-connections h323 to sip
 allow-connections sip to h323
 allow-connections sip to sip
 h323
!
!
!
voice class codec 1
 codec preference 1 g711ulaw
 codec preference 2 g729r8
!
!
!
voice class h323 1
 h225 timeout tcp establish 3
 h225 timeout setup 3
!
!
!
!
!
!
voice translation-rule 1
 rule 1 /^8220/ /8/
!
!
voice translation-profile frompstn
 translate called 1
!
!
!
!
username "yes we have these too!"
!
!
controller E1 0/0/0
 pri-group timeslots 1-16
!
translation-rule 2
 Rule 1 ^. 0 national national
 Rule 2 ^. 00 international international
!
!
translation-rule 5
 Rule 0 860 600
!
!
!
!
interface FastEthernet0/0
 ip address xxx.xxx.xxx.254 255.255.255.0
 duplex auto
 speed auto
 h323-gateway voip interface
 h323-gateway voip bind srcaddr xxx.xxx.xxx.254
!
interface FastEthernet0/1
 no ip address
 shutdown
 duplex auto
 speed auto
!
interface Serial0/0/0:15
 no ip address
 isdn switch-type primary-net5
 isdn incoming-voice voice
 no cdp enable
!
ip default-gateway xx.xx.xx.1
ip classless
ip route 0.0.0.0 0.0.0.0 xx.xx.xx.1
!
!
ip http server
no ip http secure-server
!
!
!
!
control-plane
!
!
!
voice-port 0/0/0:15
!
!
!
!
!
dial-peer voice 1 pots
 translation-profile incoming frompstn
 incoming called-number .
 direct-inward-dial
!
dial-peer voice 2 pots
 destination-pattern 999
 progress_ind alert enable 8
 progress_ind progress enable 8
 progress_ind connect enable 8
 port 0/0/0:15
 forward-digits all
!
dial-peer voice 3 pots
 destination-pattern 9999
 progress_ind alert enable 8
 progress_ind progress enable 8
 progress_ind connect enable 8
 port 0/0/0:15
 forward-digits 3
!
dial-peer voice 4 pots
 destination-pattern 112
 progress_ind alert enable 8
 progress_ind progress enable 8
 progress_ind connect enable 8
 port 0/0/0:15
 forward-digits all
!
dial-peer voice 6 pots
 destination-pattern 9112
 progress_ind alert enable 8
 progress_ind progress enable 8
 progress_ind connect enable 8
 port 0/0/0:15
 forward-digits 3
!
dial-peer voice 10 voip
 description INCOMING DDI RANGE 01228 822 060 --- 080
 preference 2
 destination-pattern 8..
 progress_ind setup enable 3
 voice-class codec 1
 voice-class h323 1
 session target ipv4:xx.xx.xx.11
 dtmf-relay h245-alphanumeric
 ip qos dscp cs5 media
 no vad
!
dial-peer voice 11 voip
 description INCOMING DDI RANGE 01228 822 060 --- 080
 preference 2
 destination-pattern 8..
 progress_ind setup enable 3
 voice-class codec 1
 voice-class h323 1
 session target ipv4:xx.xx.xx.10
 dtmf-relay h245-alphanumeric
 ip qos dscp cs5 media
 no vad
!
dial-peer voice 15 voip
 destination-pattern 860
 progress_ind setup enable 3
 translate-outgoing called 5
 voice-class codec 1
 voice-class h323 1
 session target ipv4:xx..xx.xx.10
 dtmf-relay h245-alphanumeric
 ip qos dscp cs5 media
 no vad
!
dial-peer voice 16 voip
 destination-pattern 860
 progress_ind setup enable 3
 translate-outgoing called 5
 voice-class codec 1
 voice-class h323 1
 session target ipv4:xx.xx.xx.11
 dtmf-relay h245-alphanumeric
 ip qos dscp cs5 media
 no vad
!
dial-peer voice 99 pots
 description Dial Peer to PSTN
 destination-pattern 9.T
 progress_ind alert enable 8
 progress_ind progress enable 8
 progress_ind connect enable 8
 port 0/0/0:15
!
!
!
line con 0
 login local
line aux 0
line vty 0 4
 login local
!
scheduler allocate 20000 1000
!
end

—----------------------------------------

Rob

Richard Rose Central Academy 
Edgehill Road 
Carlisle 
Cumbria 
CA1 3SL 

Tel: 01228 822060 
Fax: 01228 822061 

http://www.richardroseacademies.org/ 

>>> Paul <asobihoudai at yahoo.com> 28/04/2009 13:30 >>>

translation-rule is a deprecated command. don't use it unless you want to go bald.

Just use

- voice translation-rule
- voice translation-profile

and then apply the profile where you need it

________________________________
From: Robin Clayton <Robin.Clayton at rrca.org.uk>
To: cisco-voip at puck.nether.net
Sent: Tuesday, April 28, 2009 4:05:11 AM
Subject: [cisco-voip] Difference between "voice translation-rule" and "translation-rule"

Hi Everyone.

What's the difference between a 

voice translation-rule 

and

translation-rule

on the gateway?

I have the following

—--SNIP-----

voice translation-rule 1
rule 1 /^8220/ /8/
!!
voice translation-profile frompstn
translate called 1
!
controller E1 0/0/0
pri-group timeslots 1-16
!
translation-rule 2
Rule 1 ^. 0 national national
Rule 2 ^. 00 international international
!
!
translation-rule 5
Rule 0 860 600
!
!
translation-rule 6
Rule 0 875 850
!

---SNIP----

I have just added "translation-rule 6"  but it seems to have no effect.   
Additionally I don't have a dial-peer for 600 ( does the dial peer take the pre-translated number 860? ) 

translation-rule 5 does 'SEEM' to work ok. 

Rob

===============================
Robin Clayton
Network Manager 
Tel: 01228822075

Richard Rose Central Academy 
Edgehill Road 
Carlisle 
Cumbria 
CA1 3SL 

Tel: 01228 822060 
Fax: 01228 822061 

http://www.richardroseacademies.org/ 