[cisco-voip] Hunt Pilot fast busy

[Wes Sisk]

AC?  did you associate to the AC user?  Is the AC user CTI enabled?  Do 
you have other functional AC Pilot Points?

/Wes

On Tuesday, April 28, 2009 3:24:55 PM, Micah Bennett 
<mbennett at als-xtn.com> wrote:
>
> Check that.  All is good.
>
>  
>
> *Micah Bennett*
>
> *From:* Bill Talley [mailto:btalley at gmail.com]
> *Sent:* Tuesday, April 28, 2009 2:19 PM
> *To:* Micah Bennett; cisco-voip at puck.nether.net
> *Subject:* RE: [cisco-voip] Hunt Pilot fast busy
>
>  
>
> I ran into this before and 'logged into hunt group' was unchecked on 
> the vg ports. After checking it, calls work as expecte
>
> ------------------------------------------------------------------------
>
> *From: *Micah Bennett <mbennett at als-xtn.com>
> *Sent: *Tuesday, April 28, 2009 1:45 PM
> *To: *cisco-voip at puck.nether.net
> *Subject: *[cisco-voip] Hunt Pilot fast busy
>
> Hello
>
> I am trying to create a simple hunt group to some ports on my vg224.
>
> I tested this before with regular IP phones and it worked fine. 
>
> I copied an existing, working Hunt Pilot and assigned members to the 
> group as usual.
>
> The new one rings fast busy.  I can't figure out what I am missing, or 
> if something is broken. 
>
> Any help is appreciated.
>
> *Micah Bennett*
>
>
>
> [The entire original message is not included]
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>   

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090428/6ff8b9fb/attachment.html>